Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 172 / 240

ENGLISH
USE AND MAINTENANCE
Page 170 Cod. F07022408
MAINTENANCE AND ADJUSTMENT OF SAFETY DEVICES
Some of the safety devices listed in chapter “SAFETY DEVICES” of this manual need to be reset and/or adjusted
after they have come into action.
WARNING!
DANGER OF GETTING CAUGHT IN MOVING PARTS OF THE MACHINE.
POTENTIAL CRUSHING OR SHEARING OF THE LIMBS.
POTENTIAL SERIOUS INJURIES OR DEATH.
Before doing any maintenance on the machine:
•
Keep in mind all the basic safety rules contained in the chapter “GENERAL SAFETY REGULATIONS”.
Do maintenance work only with the machine off and all the moving parts completely still:
•
Always turn off the tractor and remove the keys from the dashboard.
•
Always switch off the “ICON” system.
•
Never raise the machine from the ground.
REPLACEMENT OF THE PICK-UP SAFETY DEVICE
On the pick-up transmission there is a safety device with shearing bolt, against possible overloads and foreign
bodies.
If the safety device bolt located in the safety device of the pick-up should break, replace it with one of
identical quality: M8X1,25X 45-10.9 UNI 5737 (partially threaded).
IMPORTANT!
DO NOT use a higher class bolt.
•
Loosen the screws and pull out the safety guard located on the left side of the pick-up.
•
Remove the bolt and make sure that there are no pieces of the sheared bolt caught between parts of the
transmission.
•
Realign the safety device holes, manually rotating the screw feeder; reinsert the new bolt and tighten it
( HTI ) ( HTR, HTC, HTU )
•
Remount the safety guard and replace the screws.