Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 130 / 240

ENGLISH
USE AND MAINTENANCE
Page 128 Cod. F07022408
PROGRAM SETTINGS
VISUALIZATIONS (page 1)
•
PROGRAM NAME: name of the selected program;
•
DIAMETER;
•
CORE:
•
HARD: bale core is formed with initial pression set;
•
PRE-CHAMBER: bale core is formed without pressing the material, until
reaching the core diameter;
•
SOFT: bale core is formed with pressure indicated by the parameter until
reaching he core diameter;
•
CORE DIAMETER: bale core diameter, with the selected program;
•
SOFT CORE TYING PRESSURE (parameter shown only if SOFT CORE mode
is selected): core bale tying pressure, with the selected program.
COMMANDS (page 1)
Press side keys next to the symbol that represents the menu to see the name of the
menu for about 2 seconds.
Press the side key near to the icon to access a screen where character strings
can be inserted:
In the case of the parameter PROGRAM NAME, for instance, pressing the side keys near to the icons containing
the letters, up to 13 characters can be inserted.
•
The side key near the icon allow selection of upper case, lower case or numerical characters.
•
The side key near the icon clears the last inserted character. When kept pressed, the whole string is
cleared.
•
The side key near the icon allows symbols insertion into the string (+ - % , .).
Once inserted the characters string, exit from the menu confirming with the key below the icon
or quit without
confirm by pressing the key below the icon .