Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 155 / 240

USE AND MAINTENANCE
ENGLISH
Cod. F07022408 Page 153
VISUALIZATIONS (page 6)
•
Values measured by right and left load potentiometers;
•
Percentage of right and left load;
•
PAGE NO. / TOTAL PAGES;
COMMANDS (page 6)
Press side keys next to the symbol that represents the menu to see the name of the menu for about 2 seconds.
Press the side key near to the icon , to activate the wizard to run the self-learning procedure of maximum and
minimum positions of load sensors. During the procedure, the operator is asked to move sensors until they reach
max and min positions. Any anomalies in the procedure will be identified with appropriate diagnostic messages.
Note that the execution of self-learning procedures and maximum diameter calculation override the parameters
values that regulate the function: Run only if really necessary
Press the side key near to the icon to access a screen in which you can select the values of the load sensors,
referred to as Start (left and right) and sensitivity (right and left): insert the parameters values by pressing the side
buttons next to the icons and . After entering the value, press to return to the display screen described
above.
Pressing the button next to the icon , depending on the access level defined by the password you entered,
some characteristic parameters of the page are displayed;
•
Press the side key near to the icon to access the previous page;
•
Press the side key near to the icon to access the next page
•
Press the key below the icon to go back to previous menu;