Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 113 / 240

USE AND MAINTENANCE
ENGLISH
Cod. F07022408 Page 111
Visualizations during collecting phase (hard core bale):
•
FORMING BALE PRESSURE.
•
PTO SPEED (364 RPM in example above).
Once the forming bale has reached the minimum size of the room, the above screen
is replaced by the following, in which also appear the following information i:
•
SIDE BARS OF LOADING CHAMBER SENSORS: show to the operator the
machine side that has to be loaded more to maintain uniform pressure in the
bale;
•
FORMING BALE DIAMETER (58 cm in the example)
Visualizations during collecting phase (soft core bale):
•
FORMING BALE PRESSURE.
•
PTO SPEED (364 RPM in example above).
•
SIDE BARS OF LOADING CHAMBER SENSORS: show to the operator the
machine side that has to be loaded more to maintain uniform pressure in the
bale;
•
FORMING BALE DIAMETER (50 cm in the example)
Once the forming bale has reached the minimum size of the room, the above screen
is replaced by the following one; the machine continues the bale formation,
according to the program settings.