Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 116 / 240

ENGLISH
USE AND MAINTENANCE
Page 114 Cod. F07022408
Views during the NET binding phase:
•
NUMBER OF NET TURNS BEING DONE.
•
METERS OF USED NET.
During this phase, the operator can also decide to stop the tying cycle, by pressing the key near to the icon .
This will lead to a message of cycle interruption due to a tying error, with a few available choices to proceed with
the cycle:
Enter manual mode in the section about the tyring type in use, to perform manual
operations, by pressing the key near to the icon
•
Cut the net, by pressing the key near o the icon
•
Do a further tying phase, by pressing the key near to the icon
•
Move forward in the cycle, by pressing the key near to the icon
During the tying may happen that the net runs out. This will lead to an tying error message due to lack of binding
network, with a few available choices to proceed with the cycle:
•
Enter manual mode in the section about the tyring type in use, to perform
manual operations, by pressing the key near to the icon ;
•
Follow the procedure to change the net roll, by pressing the key near o the icon
;
•
Do a further tying phase, by pressing the key near to the icon ;
•
Move forward in the cycle, by pressing the key near to the icon .