Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 132 / 240

ENGLISH
USE AND MAINTENANCE
Page 130 Cod. F07022408
VISUALIZATIONS (page 2)
•
INITIAL PRESSURE: initial pressure to form the bale, after core formation.
During bale creation this value varies linearly until reaching the final pressure
described below;
•
FINAL PRESSURE: final pressure of bale formation. During the creation of the
bale, the pressure varies from the value of the initial pressure as described
above until reaching the final pressure when the bale is completed;
•
BARK: selection of an external layer formation made at maximum pressure
COMMANDS (page 2)
Press side keys next to the symbol that represents the menu to see the name of the menu for about 2 seconds.
Press the side keys near to the icons and to access to a screen where the value of a parameter can be
edited, with a brief description of the parameter itself:
In the case of the INITIAL PRESSURE parameter, pressing the side keys near to
the icons and , the parameter value can be modified in the range from 50 to 210
bar (from 725.5psi to 3047.1psi).
The parameter value can be confirmed by pressing the key below the icon
or
simply waiting: after 5 seconds, the system goes back to previous screen.
Press the side key near to the icons and , you access a screen in which you can choose whether or not to
activate a function, accompanied by a brief description of the function itself. In this case, the formation of the outer
bark of the bale.
The parameter value can be confirmed by pressing the key below the icon
or simply waiting: after 5 seconds,
the system goes back to previous screen.
•
Press the side key near to the icon to access the previous page;
•
Press the side key near to the icon to access the next page;
•
Press the key below the icon to go back to previous menu;
•
Press the key below the icon to directly access the working screen.