Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 133 / 240

USE AND MAINTENANCE
ENGLISH
Cod. F07022408 Page 131
VISUALIZATIONS (page 3)
NOTE: The binding items is represented by a single screen, regardless of the
type of binding set.
•
BINDER: binder type used by the selected program:
•
NET: bale is tied with net binder;
Parameters shown only with NET binding:
•
number of turns of the net during tying;
•
TWINE: bale is tied with twine binder;
Parameters shown only TWINE binding:
•
The number of turns of the wire made in the two ends of the bale
•
The distance from the outer edges of the bale from which to start the coils
•
The number of turns of the wire made at the centre of the bale
•
DOUBLE TWINW-NET: bale is tied with twine binder double twine-net;
For DOUBLE TWINE-NET all the parameters described above are displayed.
COMMANDS (page 3)
Press side keys next to the symbol that represents the menu to see the name of the menu for about 2 seconds.
Press the side buttons next to the icons and to go to a screen where you can select the value of a parameter
from a pre-set list with a brief description of the parameter. In this case, the binder type used.
The parameter value can be confirmed by pressing the key below the icon
or simply waiting: after 5 seconds,
the system goes back to previous screen.
Press the side keys near to the icons and to access to a screen where the value of a parameter can be
edited, with a brief description of the parameter itself:
In the case of the NET parameter, pressing the side keys near to the icons and
, the parameter value can be modified in the range from 1.6 to 5.
The parameter value can be confirmed by pressing the key below the icon
or
simply waiting: after 5 seconds, the system goes back to previous screen.
•
Press the side key near to the icon to access the previous page;
•
Press the key below the icon to go back to previous menu;
•
Press the key below the icon to directly access the working screen.
In the case of the parameter HEAD COILS, pressing the side buttons next to the
icons and , it is possible to vary the value of the parameter, in the indicated
range, from 1 to 5 rpm.
The parameter value can be confirmed by pressing the key below the icon
or
simply waiting: after 5 seconds, the system goes back to previous screen.
•
Press the side key near to the icon to access the previous page;
•
Press the key below the icon to go back to previous menu;
•
Press the key below the icon to directly access the working screen.