Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 102 / 240

ENGLISH
USE AND MAINTENANCE
Page 100 Cod. F07022408
OPERATION IN THE FIELD
SWITCHING ON
After you have set up the machine as described in the chapter “INSTRUCTIONS FOR USE”, switch on the “ICON”
control system in order to start work
NOTE: Prima di iniziare il lavoro potrete, attraverso il terminale, rivedere e/o modificare i valori del
programma con cui la vostra macchina è impostata.
Before starting work, verify that the machine is all in order, that lubricating oils are at the right level and that all
parts subject to wear and tear are fully efficient.
After making the connections described in the chapter “TRACTOR CONNECTION” e “CONNECTION OF
VARIOUS DEVICES OF THE ROUND BALER”:
•
Switch on the tractor without engaging PTO and verify proper functioning of the various baler movements.
•
Verify functioning of the hydraulic system: the opening and closing of the hatch, raising and lowering of the
pick-up (remember to bring the stop valve lever to the "OPEN" position to raise the pick-up).
•
Verify functioning of electrical connections to the terminal: switch on the "ICON" control system.
•
Verify functioning of the electrical system, turn signal, parking and brake lights.
If the round baler is provided with a cutter system (HTC, HTU), you can activate or deactivate the product cutting
knives:
Check the position of the knives to see if they are engaged (knives in the chamber) or disengaged.
Before starting work check that the arms of the twine binder or net wrapper are in the rest position and that the
respective cutting devices are unloaded.
Take a position on the swathe; open the pick-up stop valve ("OPEN" position) and lower it..
Make sure the hatch is closed as indicated on the “ICON” control system monitor (operation screen).
You can now engage the PTO and begin collection.
The rotation speed of the PTO must be between 450 and 540 rpm, and must not exceed this range of values.
RUNNING IN
Consider the first fifty bales as a break-in period (that is, until the paint of the bale chamber becomes smooth).
Before use, heavily lubricate the telescopic components of the connection to the PTO.
IMPORTANT!
If slippage occurs during operation, disengage PTO and re-start it at low speed until the joint engages,
then continue working with the PTO at rated speed.