Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 61 / 240

USE AND MAINTENANCE
ENGLISH
Cod. F07022408 Page 59
CONNECTION OF VARIOUS DEVICES OF THE ROUND BALER
After completing the hooking up of the round baler to the towing device of the tractor “TRACTOR CONNECTION”,
continue with the connection of the various devices of the round bale:
•
Connection of the “ICON” system
•
Connection of the lighting system
•
Connection of the hydraulic system.
•
Attachment of the cardan shaft.
•
Connecting the braking system to the tractor.
CONNECTING THE POWER CORD
IMPORTANT!
Be careful not to invert the poles:
•
RED wire “+” (positive)
•
BLACK wire “-” (negative)
To connect the power cord:
•
Fissate il cavo di alimentazione “1” lungo il trattore, facendo
in modo di portare il connettore COBO all’altezza
dell’occhione di traino o in prossimità della PTO.
•
with the tractor turned off, disconnect the ground wire from
the battery,
•
then connect the tractor's power cord “1” to the 12V battery
terminals, by connecting the red wire (+) to the positive pole
and the black wire (-) to the negative pole.
•
Now reconnect the ground wire.
•
Fasten the "1" tractor power cable along the tractor, bringing
the COBO connector to the height of the towing eye or near
the PTO.
IMPORTANTE!
Make sure that the tractor power cable, once connected to the machine cable, does not hit against the
PTO and does not interfere with working operations.