Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 184 / 240

ENGLISH
USE AND MAINTENANCE
Page 182 Cod. F07022408
If the belts should also shift at the front you will have to repeat the adjustment at point “R2”:
1) Open the tailgate slightly to loosen the belts.
WARNING!
CRUSHING HAZARD.
POTENTIAL SERIOUS INJURIES OR DEATH.
Lock the tailgate by moving the lever located on the valve block to the locked
position (lock closed).
IMPORTANT!
When the work is finished remove the safety lock of the tailgate before closing it.
•
Stop the machine and wait for all the moving parts to stop.
•
Turn off the tractor engine and remove the keys from the dashboard
2) Raise the protection guard on the side of the machine on which you intend to make the adjustment.
3) Find a position from which you can reach the adjustment point "R2" located under the top cover of the
machine and loosen the screw "A".
4) Loosen or tighten the lock nuts "d" of the stretcher so as to lower or raise the end of the roller; then screw
back the screw "A" and the lock nuts "d". Then close the gull-wing protection guard again.
5) Make sure that there are no persons near the machine (if there are keep them away) and start the tractor
again; unlock the tailgate safety lock by moving the lever to its original position and close the tailgate again.
Repeat the adjustment at points 1, 2, 3, 4, and 6 until the right adjustment has been made
If you are unable to obtain a satisfactory result consult our Assistance Service.