LSIS XBF-PN04B, Руководство пользователя

Страница: 536 / 820

Chapter 9 Functions
9-109
Remark
1.
In case function selection of external input terminal is „1: external input signal A,B,Z‟, Value of the
encoder position is displayed as 0. It does not operate even if the encoder preset command, the
value of the position of the encoder holds a value of 0.
2.
If case function selection of external input terminal changes „0: Encoder signal A,B,Z‟, the encoder
position value set initial value(0 if the maximum / minimum value contains a 0, minimum value if not
included) after checking encoder maximum/minimum value
3. State of the external input signal of state information displays Off when external input terminal
function selection is changed to „0: Encoder signal A,B,Z phase‟.
(14) Status information
- State of the external input signal A,B,Z, which can be confirmed by the state of the external I / O signal of
state information area
Memory Address
Information
1 axis
1
axis
2
axis
1
axis
2
axis
1
axis
2
axis
1
axis
2
axis
2C3 343 2C3 343 2C3 343 2C3 343 2C3