LSIS XBF-PN04B, Руководство пользователя

Страница: 263 / 820

Chapter 7 Function Block
7-56
7.8.12 Current Position Change (XPM_PRS)
Form of Function Block Description
DONE
REQ
BASE
SLOT
STAT
BOOL BOOL
USINT
USINT
UINT
AXIS USINT
PRS_ADDR DINT
Input
REQ : Request for execution of function block
BASE : Set the base no. with module
SLOT : Set the slot no. with module
AXIS : Axis to command
XBF-PN04B:1~4, XBF-PN08B:1~8
PRS_ADDR : Set the current position value to
change.
-2,147,483,648 2,147,483,647
∼
Output
DONE : Maintain 1 after first operating
STAT : Output the error no. in operation
(1) Give “Basic Parameter Setting” command to the axis designated as the axis of positioning module with BASE
(Base no. of Positioning module) and SLOT (Slot no. of Positioning module).
(2) This command is for changing the current position to random position. If it is executed in the state of non-origin,
the origin signal would be On and the current position would be set as setting value (PRS_ADDR).
(3) You can set axis to command in “AXIS” and the following value is available. If you set other values, error code
“6” appears.
XBF-PN04B:1~4, XBF-PN08B:1~8