Kobelco SK35SR-6 Скачать руководство пользователя страница 80

Страница: 80 / 296

The manual levers and travel pedals are used

for the travel operation of this machine.

Use these travel levers to switch the travel

direction forward or backward.

･

(a) Forward: Push travel levers toward front

(Depress the forward of travel pedals)

･

(b) Reverse: Pull travel levers toward yourself

(Depress the backward of travel pedals)

･

(N) Neutral: The machine stops traveling.

2.5.4

TRAVEL LEVER & PEDAL

HANDLING OF THE TRAVEL LEVER & PEDAL

Use caution with the control lever in travel operation. There is a possibility of accident because the

attachment is suddenly swung and moved by the unexpectedly touching and shifting the control lever.

When operating the control lever, make sure the crawler frame direction. When travel motor (1) is

located on the front side, the travel lever functions will be opposite.

If you put your foot on a pedal during work, there is a possibility of severe injury because the

machine will start abruptly if the pedal is depressed unintentionally.

Do not put your foot on a pedal, except for driving or turning with pedals.

Pay attention when driving and operating with pedals.

TRAVEL ALARM

While traveling, the travel alarm sounds to inform surrounding workers of the machine movement.

If the travel alarm does not sound when travel levers (or pedals) are operated, stop the engine

immediately and contact KOBELCO authorized dealer/distributor near you for repair.

If you continue working with the broken travel alarm, it may cause severe injury.

［

2. MACHINE FAMILIARIZATION

］

2-16

Содержание SK35SR-6

































































































































































































































































Результаты поиска

Содержание SK35SR-6

Отзывы:

Похожие инструкции для SK35SR-6

Бренды по названию

Популярные бренды

Kobelco SK35SR-6, Руководство по эксплуатации

Результаты поиска

Содержание SK35SR-6

Отзывы:

Похожие инструкции для SK35SR-6

Бренды по названию

Популярные бренды