1.
Perform the steps 1 to 3 described above
in Paragraph "START-UP UNDER NORMAL
CONDITIONS".
2.
Turn starter switch (1) to the "HEAT"
position to start preheating. After
preheating of about 15 seconds, the
engine can be started more easily.
3.
Turn starter switch (1) to the "START"
position to start the engine.
4.
When the engine starts, release the hand
from starter switch (1). The starter key will
return to the "ON" position by itself.
5.
After the engine speed is stabilized, move
the engine throttle lever to the low idle
position to warm up the engine.
３
3.4.2
START UP IN COLD CONDITIONS
In cold weather, due to increase in oil viscosity and decrease in battery performance, starting the
engine may be difficult. Use the preheater to start the engine easily under these conditions.
In cold weather, a white smoke may appear immediately after the engine starts. It is normal and it
disappears after a little while.
［
3. MACHINE OPERATION
］
3-13
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PX00051ZE03] [0731CsCshWbYs]
