1.
On a snow or icy road, rubber track
shoes can skid very easily. Do not use
rubber track shoes on a snow or icy slope.
2.
Avoid a spin turn on a concrete road.
3.
Do not make an rapid turn, which causes
early wear or damage to the rubber track
shoes.
4.
Be careful not to damage the rubber track
shoes with the bucket during the work.
5.
Do not operate the machine while rubbing
the rubber track shoes against a concrete
or wall.
6.
Slowly lower the machine which was
raised using the attachment.
7.
Work in a salty or corrosive environment
affects the adhesive applied to core metal.
Avoid such locations or wash the rubber
track shoes after use.
8.
Use the rubber track shoes at a
temperature between -25 to +55 degrees
C because of physical properties of rubber.
9.
Do not turn on an uneven surface (about
20 cm) such as curbs or rocks. To travel
across an uneven surface, go over it in the
right angle.
3.16.4
PRECAUTIONS FOR USE OF RUBBER TRACK SHOE
Note the followings during the work:
Use the rubber track shoes with a proper tension to prevent them from coming off. If the tension is
loose, it causes coming off of rubber track shoes under the conditions below. Use extreme caution
during the operation even when the tension is proper.
［
3. MACHINE OPERATION
］
3-42
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PX00051ZE03] [0731CsCshWbYs]
