JUKI HZL-F series, Инструкция по эксплуатации

Страница: 22 / 168

Presser foot to
be used (marking)
Stitch pattern
Zigzag width
Stitch length
Pattern select mode
2
Stitch length
adjusting dial
3
Confirmation
button
6
Automatic lock
stitch and thread
trimming button
7
Needle stop position
switching button
8
Continuous
stitch button
9
Mirror image
button
!0
Option button
4
Selection button
1
Zigzag width
adjusting dial
5
Clear button
!3
Pattern selection mode
switching button
!2
Pattern selection button
Needle stop position
Pattern number
Name and function of other operational buttons
* Patterns on the screen
will be sewn.
Operational buttons and screen
!1
Save/Call button
Description of screen
Name of operational button
19
Direct select
Select by number
Cell phone
input
Needle stops at
its highest position
Needle stops at its
lowest position
Direct pattern
Letters
(Cell phone input)
Number
selection
(Input by
number)
Needle position
(Center needle position in
this pattern.)
Direct patterns
Practical patterns
Buttonhole patterns
Quilt patterns
Decorative patterns
One-point patterns
Letters
10 most often used
patterns can be
selected.
Practical patterns other
than direct patterns can
be selected.
Patterns such as
letters which can be
combined, can be
selected.
* Adjusting buttons
on F400/F300.
* Adjusting buttons
on F400/F300.
1
Zigzag width
adjustment dial
This is used to change the zigzag width and the needle position.
2
Stitch length
adjustment dial
This is used to change the stitch length.
3
Confirmation
button
This is used to confirm the selected stitch pattern and/or settings.
4
Selection button This is used to move the cursor.
5
Clear button This is used to delete the selected stitch pattern and to cancel each setting.
When pressing the button continuously, all the saved stitch patterns will be
deleted.
6
Automatic lock
stitch and thread
trimming button
When it is pressed, symbol “ “ will be shown on the screen.
The machine will automatically lock stitches at sewing-start and sewing-end
and then trim both threads.
7
Needle stop
position
switching button
When it is pressed, either symbol “ ” or “ ” will be shown on the screen.
When sewing with symbol “ ”, the needle stops at its highest position.
When sewing with the symbol “ ”, the needle stops at its lowest position.
8
Continuous
stitch button
This button is valid only when “ “ mode.
When it is pressed, symbol “ “ will be shown on the screen.
The machine will sew the selected stitch patterns continuously.
When it is pressed again, the machine will cancel this function.
* When it is pressed while sewing, the machine will stop after the selected
patterns are sewn completely.
9
Mirror Image
button
After selecting a stitch pattern, press this button to make a mirror image of the selected
pattern.
* There are some patterns that can not make a mirror image.
!0
Option button It is possible to change the following function and settings.
・
Seam width of buttonhole
・
Needle position
・
Thread trimming by foot controller
・
Twin needle
・
Guide
・
LCD display contrast
・
Buzzer volume
・
Language
・
Elongation
* Optional functions vary from stitch pattern to stitch pattern.
(Refer page 126~138 for more details.)
!1
Save/call button This is used to save and/or call a pattern. The machine can save maximum 10 patterns.
(Refer to page 123 and 124 for more details.)
!2
Pattern selection
button
A stitch pattern can be selected.
* Usage of the buttons varies by pattern selecting mode.
(Refer to page 51~62 for more details.)
!3
Pattern selection
mode switching
button
When the pattern selection mode needs to be changed, press the desired button.
The selected button will be illuminated.
Name and function of operational buttons
20
* buttons on F400/F300.
* buttons on F400/F300.
20