Installing a Power Supply Unit
l
Follow the safety guidelines listed in
l
For systems that support redundant PSU, ensure that both the PSUs are of the same type
and have the same maximum output power.
N
OTE
:
The maximum output power (shown in watts) is listed on the PSU label.
Follow the below steps to install the Power Supply Unit :
1. Slide the PSU into the system until the PSU is fully seated and the release latch snaps
into place.
1. If you have unlatched the cable management arm, relatch it.
2. Connect the power cable to the PSU, and plug the cable into a power outlet.
CAUTION: When connecting the power cable to the PSU, secure the cable to the PSU
with the strap.
Installing and Removing System Components
Power supply units
92
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
