Follow the below steps to remove the PERC card from the Internal PERC Riser:
1. Using a Phillips #2 screwdriver, remove the screw that secures the PERC card to the
internal PERC riser.
2. Pull the PERC card out of the connector on the internal PERC riser.
After removing the PERC card from the Internal PERC Riser you could do the following:
1. Install the PERC card into the internal PERC riser.
2. Replace the air shroud.
3. Follow the procedure listed in
After working inside your system
Installing PERC card into the Internal PERC riser
l
Follow the safety guidelines listed in
Follow the below steps to install the PERC card from the Internal PERC Riser:
1. Insert the PERC card into the internal PERC riser and push the card in.
2. Using a Phillips #2 screwdriver, replace the screw to secure the PERC card on the internal
PERC riser.
Installing and Removing System Components
Internal PERC riser
62
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
