After installing the PERC card from the Internal PERC Riser you could do the following:
1. Install the internal PERC riser.
2. Install the air shroud.
3. Follow the procedure listed in
After working inside your system
Expansion cards and expansion card risers
N
OTE
:
A System Event Log (SEL) event is logged if an expansion card riser is not
supported or missing. It does not prevent your system from turning on. However, if a
F1/F2 pause occurs, an error message is displayed.
Expansion Card Installation Guidelines
Depending on your system configuration, the following PCI Express (PCIe) generation 3
expansion cards are supported:
Table 3: Expansion card riser configurations
Expansion card
riser
PCIe slots on the
riser
Height
Length
Link
LOM riser
Slot 1
Mezz type
Mezz type
x8
Right riser
Slot 2
Low Profile
Half Length x16
Right riser
Slot 2
Full Height
Half Length x16
PCIe passive bridge
Slot-integrated
Low Profile
Half Length x8
Internal riser
Slot-integrated
Low Profile
Half Length x8
Left riser
Slot 3
Low Profile
Half Length x16
N
OTE
:
The expansion card slots are not hot-swappable.
Installing and Removing System Components
Expansion cards and expansion card risers
63
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
