After installing the expansion card riser you could do the following:
1. Follow the procedure listed in
After working inside your system
2. Install any device drivers required for the card as described in the documentation for the
card.
Removing an expansion card riser
l
Follow the safety guidelines listed in
l
Follow the procedure listed in
Before working inside your system
.
l
Disconnect any cables connected to the expansion card.
Follow the below steps to remove an Expansion Card Riser:
Hold the touch points, and lift the expansion card riser, from the riser connector, on the
system board.
Installing and Removing System Components
Expansion cards and expansion card risers
70
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
