STEP RESULT: The ePSA Pre-boot System Assessment window is displayed, listing all
devices detected in the system. The diagnostics starts executing the tests on all the
detected devices.
Running the Embedded System Diagnostics from the Lifecycle Controller
1. As the system boots, press
<F11>
.
2. Select
Hardware Diagnostics ? Run Hardware Diagnostics
.
STEP RESULT: The ePSA Pre-boot System Assessment window is displayed, listing all
devices detected in the system. The diagnostics starts executing the tests on all the
detected devices.
System diagnostic controls
Menu
Description
Configuration
Displays the configuration and status information of all detected devices.
Results
Displays the results of all tests that are executed.
System health
Provides the current overview of the system performance.
Event log
Displays a time-stamped log of the results of all tests run on the system. This is displayed
if at least one event description is recorded.
Using System Diagnostics
Embedded System Diagnostics
111
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
