4. Follow the procedure listed in
After working inside your system
5. Install any device drivers required for the card as described in the documentation for the
card.
M.2 SSD module
N
OTE
:
The write-protect switch is on the IDSDM or vFlash module.
Installing the M.2 SSD module
l
Follow the safety guidelines listed in
l
Remove the air shroud.
l
Remove the BOSS card.
N
OTE
:
The procedure to remove the BOSS card is similar to the removing an
expansion card.
Follow the below steps to install a M.2 SSD module:
1. Connect the M.2 SSD module to the connector on the BOSS card.
2. Place the retention strap on the M.2 SSD module, and tighten the screw to secure the
module.
After installing the M.2 SSD module you could do the following:
1. Install the BOSS card.
N
OTE
:
The procedure to install the BOSS card is similar to the removing an
expansion card.
Installing and Removing System Components
M.2 SSD module
75
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
