Installing the TPM
To install the TPM follow the below steps:
1. To install the TPM, align the edge connectors on the TPM with the slot on the TPM
connector.
2. Insert the TPM into the TPM connector such that the plastic rivet aligns with the slot on
the system board.
3. Press the plastic rivet until the rivet snaps into place.
After installing the TPM do the following:
1. Install the system board.
2. Follow the procedure listed in After working inside your system.
Initializing TPM for BitLocker users
l
Initialize the TPM.
l
The TPM Status changes to Enabled, Activated.
Initializing the TPM 1.2 for TXT users
Follow the below steps to initialize the TPM:
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
Installing and Removing System Components
Initializing TPM for BitLocker users
105
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
