N
OTE
:
If reinstalling, ensure that you install the MicroSD cards into the same slots
based on the labels you had marked on the cards during removal.
Follow the below steps to install a MicroSD card:
1. Locate the MicroSD card connector on the IDSDM/vFlash module. Orient the MicroSD card
appropriately and insert the contact-pin end of the card into the slot. To locate
IDSDM/vFlash, see the System board jumpers and connectors section.
N
OTE
:
The slot is keyed to ensure correct insertion of the card.
2. Press the card into the card slot to lock it into place.
After installing the MicroSD card you could do the following:
1. Follow the procedure listed in
After working inside your system.
Optional IDSDM or vFlash module
Removing the Optional IDSDM or vFlash card
l
Follow the safety guidelines listed in
l
Follow the procedure listed in
Before working inside your system
.
l
If you are replacing the IDSDM/vFlash card, remove the MicroSD cards.
N
OTE
:
Temporarily label each MicroSD card with its corresponding slot number after
removal.
Follow the below steps to remove a Optional IDSDM or vFlash card:
Installing and Removing System Components
Optional IDSDM or vFlash module
78
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
