Installing a drive into the drive carrier
CAUTION
: Mixing drive carriers from other generations of PowerEdge servers is not
supported.
N
OTE
:
When installing a drive into the drive carrier, ensure that the screws are
torqued to 4 in-lbs.
Follow the below steps to install the Drive from Drive Carrier:
1. Insert the drive into the drive carrier with the connector end of the drive towards the back
of the carrier.
2. Align the screw holes on the drive with the screws holes on the drive carrier. When aligned
correctly, the back of the drive is flush with the back of the drive carrier.
3. Using a Phillips #1 screwdriver, secure the drive to the drive carrier with screws.
Installing and Removing System Components
Drives
46
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW