2. Install the air shroud.
3. Follow the procedure listed in After working inside your system.
Removing the M.2 SSD module
l
Follow the safety guidelines listed in
l
Follow the procedure listed in Before working inside your system.
l
Remove the air shroud.
l
Remove the BOSS card.
N
OTE
:
The procedure to remove the BOSS card is similar to the removing an
expansion card.
Follow the below steps to remove a M.2 SSD module:
1. Loosen the screw and lift the retention strap that secures the M.2 SSD module on the
BOSS card.
2. Lift the M.2 SSD module and slide it out of the connector on the BOSS card
After removing the M.2 SSD module you could do the following:
1. Replace the M.2 SSD module.
Installing and Removing System Components
M.2 SSD module
76
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
