Using System Diagnostics
If you experience a problem with your system, run the system diagnostics before contacting
Gigamon for technical assistance. The purpose of running system diagnostics is to test your
system hardware without requiring additional equipment or risking data loss. If you are
unable to fix the problem yourself, service and support personnel can use the diagnostics
results to help you solve the problem.
Embedded System Diagnostics
N
OTE
:
NOTE: The Embedded System Diagnostics is also known as Enhanced Pre-
boot System Assessment (ePSA) diagnostics.
The embedded system diagnostics provides a set of options for particular device groups or
devices allowing you to:
• Run tests automatically or in an interactive mode
• Repeat tests
• Display or save test results
• Run thorough tests to introduce additional test options to provide extra information about
the failed device(s)
• View status messages that inform you if tests are completed successfully
• View error messages that inform you of problems encountered during testing
When to use the Embedded System Diagnostics
If a major component or device in the system does not operate properly, running the
embedded system diagnostics may indicate component failure.
Running the Embedded System Diagnostics from Boot Manager
1. As the system boots, press
<F11>
.
2. Use the up and down arrow keys to select
System Utilities > Launch Diagnostics
.
Using System Diagnostics
Embedded System Diagnostics
110
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
