l
Enter the correct time and date in the System Setup Time and Date fields.
l
Exit the System Setup.
Optional internal USB memory key
N
OTE
:
To locate the internal USB port on the system board, see the
section.
Replacing the optional internal USB memory key
CAUTION: To avoid interference with other components in the server, the maximum
permissible dimensions of the USB memory key are 15.9 mm wide x 57.15 mm long x 7.9
mm high.
l
Follow the safety guidelines listed in
l
Follow the procedure listed in
Before working inside your system
.
Follow the below steps to replace the optional Internal USB Memory Key:
1. Locate the USB port or USB memory key on the system board. To locate the USB port, see
the Jumpers and connectors.
2. If installed, remove the USB memory key from the USB port.
3. Insert the replacement USB memory key into the USB port.
Follow the below steps after replacing the optional Internal USB Memory Key:
1. Follow the procedure listed in
After working inside your system
2. While booting, press F2 to enter System Setup and verify that the system detects the USB
memory key.
Optical drive (optional)
Removing the optical drive
l
Follow the safety guidelines listed in
l
Follow the procedure listed in
Before working inside your system
.
Installing and Removing System Components
Optional internal USB memory key
88
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010 and GFM-HW1-FM001-HW
