Edge-Core ES4625 Скачать руководство пользователя страница 443

Страница: 443 / 674

SNMP Commands

4-115

snmp-server view

This command adds an SNMP view which controls user access to the MIB. Use the

form to remove an SNMP view.

Syntax

snmp-server view

view-name oid-tree

{

included

excluded

}

no snmp-server view

view-name

• view-name -

Name of an SNMP view. (Range: 1-64 characters)

•

oid-tree

- Object identifier of a branch within the MIB tree. Wild cards can

be used to mask a specific portion of the OID string. (Refer to the
examples.)

•

included

- Defines an included view.

•

excluded

- Defines an excluded view.

Default Setting

defaultview (includes access to the entire MIB tree)

Command Mode

Global Configuration

Command Usage

• Views are used in the

snmp-server group

command to restrict user access

to specified portions of the MIB tree.

• The predefined view “defaultview” includes access to the entire MIB tree.

Examples

This view includes MIB-2.

This view includes the MIB-2 interfaces table, ifDescr. The wild card is used to select
all the index values in this table.

This view includes the MIB-2 interfaces table, and the mask selects all index entries.

Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included
Console(config)#

Console(config)#snmp-server view ifEntry.2 1.3.6.1.2.1.2.2.1.*.2 included
Console(config)#

Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.* included
Console(config)#

Содержание ES4625



































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4625

Отзывы:

Edge-Core ES4625, Руководство по управлению, Страница: 443 / 674

Результаты поиска

Содержание ES4625

Отзывы: