Edge-Core ES4625 Скачать руководство пользователя страница 108

Страница: 108 / 674

Configuring the Switch

3-56

• RADIUS Settings

Global

– Provides globally applicable RADIUS settings.

ServerIndex

– Specifies one of five RADIUS servers that may be configured.

The switch attempts authentication using the listed sequence of servers. The
process ends when a server either approves or denies access to a user.

Server IP Address

– Address of authentication server. (Default: 10.1.0.1)

Server Port Number

– Network (UDP) port of authentication server used for

authentication messages. (Range: 1-65535; Default: 1812)

Secret Text String

– Encryption key used to authenticate logon access for

client. Do not use blank spaces in the string. (Maximum length: 20 characters)

Number of Server Transmits

– Number of times the switch tries to authenticate

logon access via the authentication server. (Range: 1-30; Default: 2)

Timeout for a reply

– The number of seconds the switch waits for a reply from

the RADIUS server before it resends the request. (Range: 1-65535; Default: 5)

• TACACS Settings

Server IP Address

– Address of the server. (Default: 10.11.12.13)

Server Port Number

– Network (TCP) port of server used for

authentication messages. (Range: 1-65535; Default: 49)

Secret Text String

– Encryption key used to authenticate logon access for

client. Do not use blank spaces in the string. (Maximum length: 20 characters)

Note:

The local switch user database has to be set up by manually entering user names
and passwords using the CLI. (See “username” on page 4-27.)

Содержание ES4625



































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4625

Отзывы:

Edge-Core ES4625, Руководство по управлению, Страница: 108 / 674

Результаты поиска

Содержание ES4625

Отзывы: