Edge-Core ES4625 Скачать руководство пользователя страница 243

Страница: 243 / 674

Dynamic Host Configuration Protocol

3-191

•

Client-Identifier

– A unique designation for the client device, either a text string

(1-15 characters) or hexadecimal value.

Setting the Optional Parameters

•

Default Router

– The IP address of the primary and alternate gateway router.

The IP address of the router should be on the same subnet as the client.

•

DNS Server

– The IP address of the primary and alternate DNS server. DNS

servers must be configured for a DHCP client to map host names to IP addresses.

•

Netbios Server

– IP address of the primary and alternate NetBIOS Windows

Internet Naming Service (WINS) name server used for Microsoft DHCP clients.

•

Netbios Type

– NetBIOS node type for Microsoft DHCP clients.

(Options: Broadcast, Hybrid, Mixed, Peer to Peer; Default: Hybrid)

•

Domain Name

– The domain name of the client. (Range: 1-32 characters)

•

Bootfile

– The default boot image for a DHCP client. This file should placed on the

Trivial File Transfer Protocol (TFTP) server specified as the Next Server.

•

Next Server

– The IP address of the next server in the boot process, which is

typically a Trivial File Transfer Protocol (TFTP) server.

•

Lease Time

– The duration that an IP address is assigned to a DHCP client.

(Options: fixed period, Infinite; Default: 1 day)

Examples

Creating a New Address Pool

Web

– Click DHCP, Server, Pool Configuration. Specify a pool name, then click Add.

Figure 3-110 DHCP Server Pool Configuration

CLI

– This example adds an address pool and enters DHCP pool configuration

mode.

Console(config)#ip dhcp pool mgr

4-126

Console(config-dhcp)#

Содержание ES4625



































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4625

Отзывы:

Edge-Core ES4625, Руководство по управлению, Страница: 243 / 674

Результаты поиска

Содержание ES4625

Отзывы: