Delta DVP-15MC Series, Руководство по эксплуатации

Страница: 657 / 972

Chapter 11 Motion Control Instructions
11-187
11
Slave a xis p osit io n
Mas ter ax is p osition
MC_CamI n Ex ecut ion Proc es s
1
2
3
4
5
6
10 0 1000
A ct iv at io nPos ition Abs olut e ax is pos ition
:
Stage 1: Trigger and execute the MC_CamIn instruction. The master axis absolute position is
100 at the moment.
Stage 2: Wait for the start of the engagement.
Stage 3: The master axis reaches the position for starting the engagement (1000) and the
slave axis starts to perform the engagement action.
Stage 4: The engagement is being conducted.
Stage 5: The engagement is completed and the master axis and slave axis achieve the
synchronization.
Stage 6: The master axis and slave axis are in the synchronous motion.

ActivationPosition: Absolute axis phase
When ActivationMode =2, ActivationPosition is an absolute axis phase which is the remainder got
by dividing the axis absolute position by modulo. The slave axis starts to perform the engagement
action as the master axis absolute phase is
ActivationPosition .
The absolute axis phase is cyclic. Its absolute axis phase may be equal to ActivationPosition
many times in the motion of the master axis. But the slave axis starts to perform the engagement
action only when the absolute axis phase of the master axis is equal to
ActivationPosition for the
first time after the MC_CamIn instruction is executed.
For example, the master axis modulo is 400,
ActivationPosition =100 and the master axis position
is 1000 at the time when the MC_CamIn instruction is executed. The slave axis will not perform
the engagement action because the absolute axis phase of the master axis is 200
(200=1000%400) at the time when the
MC_CamIn instruction is executed. The slave axis starts to
perform the engagement action as the master axis position is 1300 (Absolute axis phase is
100=1300%400) or 900 (Absolute axis phase is 100=900%400). (% means the mathematic
operation to find the remainder)
S lave a xis p osition
Mas ter ax is po sition
MC_CamI n Ex ecu tion Proc es s
1
2
3
4
5
6
10 00 1300
Ac tiva tionPo sition A bs olu te axis phas e
:
C a se 1