Chapter 13
13-1
13.1 Periodically Replaced Parts
13.1.1 Overview
0010-9503
Some parts of the machine must be replaced on a periodical basis to ensure a specific level of machine
performance. (They are likely to affect the performance once they fail even in the absence of external
change or damage.)
Whenever possible, plan their replacement so that it will coincide with a scheduled service visit.
The values indicated are estimates only and are subject to change according to the site environment and
usage habit.
- Checking the Timing of Replacement
You can check the timing of replacement in service mode:
COPIER > COUNTER > PRDC-1
13.1.2 Machine Proper
0010-9504
T-13-1
* Old type (full plated type) may not be used.
After replacing the charging wire, be sure to execute wire cleaning in service mode: COPIER > FUNC-
TION > CLEANING > WIRE-CLN.
* After the work, be sure to move the cleaning holder manually toward the front before putting the
charging assembly back into the machine.
13.2 Durables and Consumables
13.2.1 Overview
0010-9506
Some parts of the machine may have to be replaced once or more over the warranty period of the product
because of deterioration or damage. Replace them when they have failed.
- Checking the Timing of Replacement
You can check the timing of replacement in service mode:
- Main Machine
COPIER > COUNTER > DRBL-1
- Accessory
COPIER > COUNTER > DRBL-2
As of Nov 2005
No. Parts name
Parts No.
Q'ty
Life
(pages)
Remarks
1
Pre-transfer/transfer/separation
charging wire
FB4-3687-000 AR
500,000*
if high temperature/humidity,
250,000 prints
2
Primary charging wire
FB4-3687-000 AR
500,000*
if high temperature/humidity,
250,000 prints
if normal temperature/low
humidity, 400,000
3
Primary grid wire
FY1-0883-000 AR
500,000*
4
Main thermistor
FG6-7748-020 1
500,000
5
Sub thermistor
FH7-7464-000 1
500,000
6
Thermal switch unit
FG6-7745-000 1
1,000,000
7
Ozone filter (drum)
FB6-0776-000 1
1,000,000
8
Ozone filter (separation)
FB6-0397-000 1
1,000,000
9
Ozone filter (fixing)
FC7-3082-000 1
1,000,000
10
Side seal (front)
FL2-5152-000 1
500,000
11
Side seal (rear)
FL2-5153-000 1
500,000
The values above are estimates only, and are subject to change based on future data.
Содержание IMAGERUNNER 7095 PRINTER
