Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 513 / 615

Chapter 17
17-51
<Input Key Names and Screen Indications>
<PART-CHK>
T-17-40
Key Indications Key Indications Key Indications
0 to 9,#,* 0 to 9,#,* Initial Setup/
Register USER Authenticate ID
Reset RESET Start START Help ?
Stop STOP Clear CLEAR Check Counter BILL
COPIER > FUNCTION > PART-CHK
Sub item Description Level
CL Use it to specify the clutch whose operation you want to check. (settings: 1 to 21)
1
<Procedure>
1) Select the item.
2) Type in the appropriate number using the keypad.
3) Press the OK key.
CL-ON Use it to start a check on the operation of a clutch.
1
<Procedure>
1) Select the item, and press the OK key so that the clutch repeatedly goes on and off as
follows:
on for 05 sec -> off for 10 sec -> on for 0.5 sec -> off for 10 sec -> on for 0.5 speed -> off
MTR Use it to select a motor whose operation you want to check. (settings: 1 to 13)
1
<Procedure>
1) Select the item.
2) Type in the appropriate number using the keypad.
3) Press the OK key.
MTR-ON Use it to start a check on the operation of a motor.
1
<Procedure>
1) Select the item, and press the OK key.
- on for 20 sec -> off
- if buffer motor or duplexing horizontal registration motor, on for 10 sec -> off
- if shift tray motor, stops at front/rear HP
- if vibration motor (M10/M20), repeats on and off at intervals of about 5 sec
SL Use it to select the operation of a solenoid.
1
<Procedure>
1) Select the item.
2) Enter the appropriate number using the keypad.
3) Press the OK key.
SL-ON Use it to start a check on the operation of a solenoid.
1
<Procedure>
1) Select the item, and press the OK key.
on for 0.5 sec -> off for 5 sec -> on for 0.5 sec -> off for 5 sec, on for 0.5 sec -> of