Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 515 / 615

Chapter 17
17-53
<CLEAR>
T-17-41
COPIER > FUNCTION > CLEAR
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description Level
ERR Use it to reset an error code.
1
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then on the main power.
DC-CON Use it to initialize the RAM on the DC controller PCB.
1
The RAM will be initialized when the main power is turned off and then back on.
<Procedure>
1) Print out the particulars of service mode by making the following selections: COPIER >
FUNCTION > MISC-P > P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.
4) As necessary, enter the data printed out using P-PRINT.
R-CON Use it to initialize the RAM on the reader controller PCB.
1
<Procedure>
1) Print out the particulars of service mode by making the following selections:
COPIER>FUNCTION>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.
4) As necessary, enter the data printed using P-PRINT.
JAM-
HIST Use it to reset the jam history.
1
The jam history will be reset when the OK key is pressed.
<Procedure>
1) Select the item, and press the OK key.
ERR-
HIST Use it to reset the error code history.
1
The error code history will be reset when the OK key is pressed.
<Procedure>
1) Select the item, and press the OK key.
PWD-
CLR Use it to reset the password for 'system administrator' set in user mode.
1
The password will be reset when the OK key is pressed.
<Procedure>
1) Select the item, and press the OK key.
ADRS-
BK Use it to reset the address book data.
1
The address book data will be reset when the main power is turned off and then back on.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power switch.
CNT-
MCON Use it to reset the service counter controlled by the main controller PCB.
1
The counter will be reset when the OK key is pressed.
<Procedure>
1) Select the item, and press the OK key.
CNT-
DCON Use it to reset the service counter controlled by the DC controller PCB.
1
The counter will be reset when the OK key is pressed.
<Procedure>
1) Select the item, and press the OK key.
OPTION
** Use it to initialize the RAM on the reader controller PCB. (items under COPIER>OPTION
only)
1
The RAM will be initialized when the OK key is pressed.
<Procedure>
1) Select the item, and press the OK key.