Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 528 / 615

Chapter 17
17-66
ORG-
LTR Use it to select special paper sizes (not recognized when the ADF is in use).
2
settings
*
0: Letter (default); 1: Executive; 2: Korean Government; 3: Argentine Letter; 4: Government
Letter
**
0: Letter (default); 1: Executive; 2: Argentine Letter; 3: Government Letter
ORG-B5
** Use it to set a special paper size (not recognized when the ADF is in use).
2
settings
0: B5 (delay); 1: Korean Government
UI-COPY Use it to enable/disable display of the copier screen on the control panel.
2
settings
0: do not display; 1: display (default)
UI-BOX Use it to enable/disable display of the box screen on the control panel.
2
settings
0: do not display; 1: display (default)
UI-SEND Use it to enable/disable display of the transmission screen on the control panel.
2
settings
0: do not display; 1: display (default)
UI-FAX not used 2
UI-EXT Use it to enable/disable display of the extension screen on the control panel.
2
settings
0: do not display; 1: display (default)
NW-
SPEED Use it to select an appropriate data transmission speed for service when connected to a
network.
2
settings
0: auto (default); 1: 100Base-TX; 2: 10Base-T
TRY-
CHG Use it to switch over the tray control mechanism for a tray full condition.
2
settings:
0: delivers to priority tray (default); 1: delivers to tray used for previous job
STS-
PORT Use it to turn off/on the TOT sync type command communication port.
2
Turns on/off the inquiry/response (sync) type command communication port for TUF over
TCP/IP.
settings
0: off (default); 1: on
CMD-
PORT Use it to turn on/off the TOT async type status communication port.
2
Turns off/on the async status communication port for TUIF over TCP/IP.
settings
0: off (default); 1: on
MODELS
Z2 Use it to make global support settings for copyboard original size detection.
2
settings
0: normal; 1: inch/AB mix detection
SZDT-
SW Use it to switch between means of copyboard original size detection (CCD -> photosensor).
2
settings
0: disable; 1: enable
NS-
CMD5 Use it to set restrictions on the use of CRAM-MD5 authentication for SMTP authentication.
2
settings
0: depend on SMTP server (default); 1: disable
NS-
GSAPI Use it to set restrictions on the use of GSSAPI authentication on SMTP authentication.
2
settings
0: depend on SMTP server (default); 1: disable
COPIER > OPTION > BODY
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description Level