Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 76 / 615

Chapter 2
2-29
2.2.18 Adjusting the Lead Edge
Registration
0011-3857
1) Make the following selections in service mode
so that the image margin will be as indicated:
COPIER > ADJUST > FEED-ADJ > REGIST.
- if the margin is too large, increase the setting
of REGIST (a change of 10 will decrease the
margin by 1 mm).
- if the margin is too small, decrease the setting
of REGIST (a change of 10 will increase the
margin by 1 mm).
Lf=4.0+1.5/-1.0
F-2-116
2.2.19 Setting the Cassette
0010-8964
1) Press the release button of cassette 3/4, and
slide out the cassette.
2) Fit the side guide plate [1] in the hole (A4/A3)
identified by the marking M [2].
F-2-117
3) Fit the included inch block from inside the
cassette so that the hole (STMT-R) of marking
A [1] and the hole (LTR-R) of marking H [2]
are covered.
- Be sure there is no gap.
- Perform the foregoing steps if the user is going
to use AB series sheets only.
F-2-118
4) Put the cassettes back in the machine.
2.2.20 Correcting the Skew
0011-4484
If paper from the left/right deck moves askew, go
through the following:
1) Loosen the 2 screws [1].
2) Push the side guide plate (front) [2] against the
paper.
F-2-119
3) With the side guide plate (front) against the
paper, tighten the screw.
0
2
4
6
8
10
0
2
4
6
8
10
Lf
[1]
[2]
[1]
[2]
[1] [2]