Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию, Страница: 533 / 615

Chapter 17
17-71
DATE-
DSP Use it to switch between date notations.
2
settings
0: YYMM/DD; 1: DD/MM/YY; 2: MM/DD/YY
MB-CCV Use it to set restrictions on the individuals permitted the use of mail box control card.
2
settings
0: do not restrict (default); 1: restrict
PR-D-
SEL Use it to set the density for printing (PDL input).
2
settings
0: (light) <->4 (standard; default) <-> 8 (dark)
TRY-STP Use it to set the output interrupt mode used in response to a tray full condition.
2
settings
0: normal mode (suspend when finisher tray becomes full; default); 1: suspend in relation to
height
MF-LG-
ST Use it to set extra length mode key.
2
settings
0: normal (default); 1: indicate extra length key on supported mode screen
SPECK-
DP Use it to enable/disable display of a warning message in response to the result of dust detection
for stream reading.
2
settings
0: do not indicate; 1: indicate (default)
CNT-
DISP Use it to enable/disable the indication of a serial number in response to a press on the counter
check mode.
2
settings
0: indicate (default); 1: do not indicate
PH-D-
SEL Use it to specify the number of lines for photo mode.
2
settings
0: 141 lines (default); 1: 134 lines
OP-SZ-
DT Use it to enable/disable the original size detection function in reference to the opening of the
copyboard cover.
2
The machine may be set so that it detects the size of an original with the copyboard cover open
(e.g., for a book).
settings
0: off (default); 1: on
If set to '1', the machine executes original size detection in response to a press on the Start key.
NW-
SCAN Use it to enable/disable the network scan function.
2
settings
0: do not permit; 1: permit
This choice is not available on a Japanese model. For a non-Japanese PS/PCL model, the
settings is fixed to '1'.
INS-C/S Use it to expand the inserter function.
2
settings
0: support only cover (default); 1: support multi-inserter (cover + interleaf)
TBIC-
RNK Use it to enable/disable halftone uneven density reduction mode.
2
settings
1 to 5 (default: 2)
HDCR-
DSP Use it to switch between HDD deletion modes.
2
settings
1: once using 0s (default); 2: once using random data; 3: 3 times using random data
BCK-
CVR Use it to enable/disable the back cover function.
2
settings
0: off; 1: on
COPIER > OPTION > USER
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description Level