Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 279 / 615

Chapter 8
8-46
5) Remove the E-ring [6], bearing [7], and three
screws [8].
F-8-121
6) Remove the E-ring [9], gear [10], pin [11],
three screws [12], E-ring [13], and bearing [14].
F-8-122
7) Remove the feeding belt unit [15], and detach
the feeding belt [16] and the postcard belt [17].
F-8-123
8.11.22 Duplexing Unit
8.11.22.1 Removing the Duplexing Unit
0010-9323
1) Slide out the duplexing unit from the main
body.
2) Holding the left and right grips of the
duplexing unit, detach it from the main body.
F-8-124
Take care not to trap your hand between the grip
and the rail. Do not place the duplexing unit
where it is subjected to damage.
8.11.22.2 Removing the Reversal Motor
0010-9336
1) Remove the duplex feed fan unit.
2) Loosen the screw [1]; then, while pulling the
tension support plate [2] in the direction of the
arrow, tighten the screw [1] (to loosen the
tension of the belt [2]).
3) Disconnect the connector [4], and remove the
2 screws [5]; then, detach the reversal motor
[6].
F-8-125
[8]
[6]
[7]
[11]
[12]
[9]
[14]
[13]
[10]
[17]
[15]
[16]
[16]
Duplexing unit Grip
Grip
[2]
[1] [3] [6]
[5]
[5]
[4]