Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 518 / 615

Chapter 17
17-56
<SENS-ADJ>
T-17-44
<SYSTEM>
T-17-45
PJH-P-2 Use it to print out the data on the history of print jobs with details. (all jobs)
1
<Procedure>
1) Select the item.
2) Press the OK key to obtain a printout.
P-TR-
EXP Use it to check the activation of the pre-transfer exposure lamp.
2
<Procedure>
1) Select the item, and press the OK key so that the pre-transfer exposure lamp goes on.
2) See that the lamp goes on and remains on for several seconds and then goes off
automatically.
CL-ADJ Use it to adjust the timing at which a clutch goes on and off. 2
COPIER > FUNCTION > SENS-ADJ
Sub item Description Level
OP-SENS Use it to execute automatic adjustment of the optical sensor.
2
1) Place paper in all decks and cassettes.
2) Select the item, and press the OK key.
3) See that 'ACTIVE' is indicated, with the result (OK/NG) indicated for the sensors that have
been checked in sequence.
COPIER > FUNCTION > SYSTEM
Sub item Description Level
DOWNL
OAD Use it to switch over to download mode.
1
<Procedure>
1) Select the item.
2) Press the OK key to switch to the Download mode screen.
CHK-
TYPE Use it to specify the partition (No.) for which HD-CHECK, HD-CLEAR will be executed.
1
<Procedure>
1) Select the item.
2) Type in the number of the partition using the keypad, and press the OK key.
0: entire HDD*
1: FSTDEV (compression image data), IMG_MNG (file control table, profile), FSTCDEV
(job archiving)
2: AP_GEN (general-purpose data, TMP_GEN (temporary file), TMP_PSS (for PDL
spooling)
3: PDLDEV (PDL-related file)
4: BOOTDEV (various firmware such as system software and content)*
5: APL_MEAP (MEAP application)
6: APL_SEND (address book, filter)
7: not used
8: APL_KEEP (non-initialization; for storage)
*: HD-CLEAR will not initialize the HDD. If necessary, use the SST/USB memory in safe
mode.
HD-
CHECK Use it to check and recover the partition selected by CHK-TYPE.
1
<Procedure>
1) Select the item.
2) Press the OK key.
3) See the result (1: OK; 2: NG (hardware); 3: NG (software); recovery/alternative sector).
COPIER > FUNCTION > MISC-P
Sub item Description Level