Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 308 / 615

Chapter 9
9-20
9.5.10.2 Mounting the Fixing Cleaning
Belt
0010-9538
Mount the fixing cleaning belt by reversing the
steps used to remove it.
1) Wind the cleaning belt [2] around the cleaning
belt take-up roller [1] two to three times, and
mount it so that the arm guide plate [3] at the
front is on the outside of the take-up roller.
At this time, check to make sure that the area of
contact with the roller is impregnated with oil.
F-9-55
Check the fixing cleaning belt for skew, wrap-
ping, and wrinkling. Further, be sure that the
winding direction and the mounting orientation
are as indicated.
F-9-56
2) After mounting the fixing cleaning belt, move
the plunger [4] of the cleaning belt feeding
solenoid into the direction of the arrow.
F-9-57
If you have replaced the cleaning belt, be sure to
return the setting under COPIER > COUNTER >
MISC > FIX-WEB to '0' in service mode.
9.5.11 Claw Jam Sensor
9.5.11.1 Removing the Claw Jam Sensor
0010-9540
1) Remove the fixing assembly.
2) Remove the 2 screws, and detach the lower
separation claw assembly.
3) Detach the claw jam sensor [1] from the right
side of the lower delivery assembly.
F-9-58
9.5.12 External Delivery Sensor
9.5.12.1 Remove the External Delivery
Sensor
0010-9543
1) Remove the external delivery roller.
2) Remove the 2 screws [1], and disconnect the
connector [2]; then, detach the external sensor
assembly [3].
F-9-59
3) Disconnect the connector [1], and detach the
external delivery sensor [2].
F-9-60
[3] [1]
[2]
Take up roller
Cleaning belt
feeding roller
[4]
[1]
[1]
[1]
[3]
[2]
[1]
[2]