Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 74 / 615

Chapter 2
2-27
2.2.17 Adjusting the Horizontal
Registration
0011-1257
<Cassette 3/4>
1) Press the release button of cassette 3/4, and
slide out the cassette.
2) Shift down the cassette front cover [1] in the
direction of the arrow.
- 2 screws [2]
F-2-107
3) Loosen the 2 fixing screws [1] found on the
right/left of the cassette.
4) Move the cassette case [2] to the front or the
rear to make adjustments.
- move it to the rear to decrease the horizontal
registration (left margin).
- move it to the front to increase the horizontal
registration (left margin).
F-2-108
5) Check to make sure that the horizontal
registration value (L; left margin) of the image
made on paper from cassette 3/4 is 2.5 +/-1.5
mm.
F-2-109
[1] Paper movement
6) When done, tighten the 2 fixing screws
loosened in step 3).
7) Shift up the cassette front cover [1] in the
direction of the arrow, and secure it in place
using 2 screws [2].
F-2-110
8) Put cassette 3/4 back inside the machine.
9) When done, execute the following service
mode items:
Cassette 3
COPIER > FUNCTION > CST > C3-STMTR
COPIER > FUNCTION > CST > C3-A4R
Register the paper width basic value for
cassette 3.
9-1) Place STMTR paper in the cassette 3, and
move the side guide plate to suit the STMTR
width.
9-2) Select C3-STMTR in service mode to
highlight, and press the OK key so that
adjustment will be executed and the value will
be registered automatically.
9-3) Likewise, repeat steps 9.1) and 9.2) for
A4R.
Cassette 4
COPIER > FUNCTION > CST > C4-STMTR
COPIER > FUNCTION > CST > C4-A4R
Perform the work you performed for cassette 3.
[1]
[2]
[1]
[1]
[2]
[2]
image
L1
[1]
[1]
[2]