Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 147 / 615

Chapter 5
5-29
4) Remove the 2 screws [1], and detach the
scanning lamp [2].
F-5-77
5.4.4.4 When Replacing Components of
the Scanning System <iR7105/7095>
0011-8733
<Components>
CCD unit, copyboard glass, scanning lamp,
standard white plate, inverter PCB
<Procedure>
Execute the following service mode item:
1) COPIER> FUNCTION> CCD> CCD-ADJ
(shading correction based on the standard white
plate)
5.4.4.5 When Replacing Components of
the Scanning System <iR7086>
0011-8738
<Components>
CCD unit, copyboard glass, stream reading glass,
scanning lamp, inverter PCB
<Procedure>
Execute the following service mode items:
1) COPIER> FUNCTION> CCD> CCD-ADJ
(shading correction based on the standard white
plate)
2) COPIER> FUNCTION> CCD> DF-WLVL1
(ADF white level; for copyboard mode)
3) COPIER> FUNCTION> CCD> DF-WLVL2
(ADF white level; for stream reading mode)
5.4.5 Reader Controller PCB
5.4.5.1 Before Starting the Work
0011-8109
1) Remove the copyboard glass.
2) Remove the CCD unit cover [1].
- 9 screws [2]
F-5-78
3) Remove the original size sensor unit.
5.4.5.2 Removing the Reader Controller
PCB
0011-7972
1) Disconnect the 5 flat cables [1] and the
connector [2], and remove the 4 screws [3];
then, detach the reader controller PCB [4].
F-5-79
[1]
[1]
[2]
[2]
[2]
[2]
[2]
[1]
[1]
[2]
[3] [3]
[1] [3] [3]
[4]