Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 501 / 615

Chapter 17
17-39
17.4 ADJUST (Adjustment Mode)
17.4.1 COPIER
17.4.1.1 COPIER Items
0011-5822
<AE>
T-17-16
<ADJ-XY>
T-17-17
COPIER > ADJUST > AE
Sub item Description Level
AE-TBL Use it to adjust the character density for image density adjustment.
1
range: 1 to 9
A higher setting will increase the density of characters.
A lower setting will decrease the density of characters.
Be sure to enter the value indicated on the service label if you have initialized the RAM on the
reader controller PCB.
COPIER > ADJUST > ADJ-XY
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description Level
Use it to adjust the image read start position.
Be sure to enter the value indicated on the service label if you have replaced the reader controller PCB or
initialized the RAM.
ADJ-X Use it to adjust the image read start position (image lead edge) in sub scanning direction.
1
range: 1 to 423 * / 1 to 2970 **
An increase by '1' will shift the image read start position by 0.1 mm toward the trail edge.
ADJ-Y Use it to adjust the image read start position (horizontal registration) in main scanning
direction.
1
range: 1 to 423 * / 0 to 1000 **
An increase by '1' will shift the image read start position by 0.1 mm toward the front.
ADJ-S Use it to adjust the shading correction data measurement position.
1
range: 20 to 500 * / 0 to 4 **
A change by '1' will increase the image read start position by 0.1 toward the front.
ADJ-Y-DF main scanning position adjustment or ADF stream reading
1
range: 1 to 423 * / 0 to 1000 **
A change by '1' will increase the image read start position by 0.1 toward the front.
STRD-POS
** Use it to adjust the CCD read position for ADF stream reading mode.
1
range: 1 to 200
ADJ-Y-FX
* Use it to adjust the main scanning position for ADF fixed reading mode.
1
range: 1 to 423
A change by '1' will shift the image read start position by 0.1 mm toward the front.
ADJ-X-MG Use it to fine-adjust the sub scanning magnification for copyboard mode.
1
range: -50 to +50 (unit: 0.01%)