Chapter 14
14-26
14.8.5 Orientation of the Feeding Roller of
the Manual Feed Tray
0010-9342
When mounting the feeding roller assembly [1] to
the manual feed tray pickup assembly, be sure
that the belt pulley [2] is toward the front of the
machine. When mounting the feeding roller [3] to
the feeding roller shaft [4], be sure that the round
marking [5] is toward the front of the machine.
F-14-56
14.8.6 Orientation of the Feeding Roller of
the Side Paper Deck
0010-9343
When mounting the feeding roller assembly [1] to
the side paper deck pickup assembly, be sure that
the belt pulley [2] is toward the front of the ma-
chine. When mounting the feeding roller [3] to
the feeding roller shaft [4], be sure that the round
marking [5] is toward the rear of the machine.
F-14-57
14.8.7 Adjusting the Pressure of the Deck/
Cassette Separation Roller
0010-9344
If double feeding or pickup failure occurs during
pickup, adjust the position of the pressure spring
of the separation roller.
- If double feeding occurs, move the hook of the
spring in the direction of arrow B.
- If pickup failure occurs, move the hook of the
spring in the direction of A.
F-14-58
T-14-5
14.8.8 Adjusting the Pressure of the
Pickup/Feeding Roller of the Manual
0010-9345
If double feeding or pickup failure occurs during
pickup, adjust the position of the pressure spring
of the separation roller.
- If double feeding occurs, move the hook of the
spring in the direction of arrow A.
- If pickup failure occurs, move the hook of the
spring in the direction of B.
F-14-59
(front)
[3]
[4]
[2]
[1]
[5]
(front of machine)
[3]
[4]
[2]
[1]
[5]
[1]
Feeding roller
[2] Separation roller
[3]
Locking lever
[4] Pressure spring
[1]
[2]
[3]
[4]
A
B
B
A
Содержание IMAGERUNNER 7095 PRINTER
