Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 267 / 615

Chapter 8
8-34
8.11
Parts Replacement Procedure
8.11.1 Cassette Pickup Assembly
8.11.1.1 Removing the Right Deck /
Cassette Pickup Assembly
0011-0030
The removal procedure of a right door and a left
door is the same. An illustration makes a right
door an example and explains it.
1) Slide out the right deck / cassette 3 / cassette 4.
2) Open the right upper cover and the right lower
cover.
An attempt to remove the pickup assembly with-
out removing the deck will cause the lifter to get
trapped, not holding the pickup assembly from
sliding out.
3) Remove the mounting screw [1], and detach
the connector cover [2]; then, disconnect the
connector [3].
4) Remove the three mounting screws [4], and
detach the pickup assembly [5].
F-8-55
8.11.1.2 Removing the Vertical Path 3/4
Sensor and the Cassette 3/4 Pickup
Sensor
0011-0032
1) Remove the cassette 3/4 pickup assembly.
2) Remove the screw, and detach the static
eliminator [2].
3) Remove the screw [3], and detach the pickup
assembly sensor base.
F-8-56
4) Disconnect the connector [1] (1 pc. each), and
free the claw; then, detach the vertical path 3/4
sensor [2] and the cassette 3/4 pickup sensor
[3].
F-8-57
8.11.2 Cassette Lifter Motor
8.11.2.1 Removing the Lifter Motor (M16/
M17) of the Cassette (3/4)
0010-8958
1) Slide out the front deck (right); then, slide out
the cassette 3/4.
2) Remove the front lower right cover of the
cassette assembly as instructed under
"Removing the Vertical Path Roller 2."
3) Remove the two fixing screws [1] of the lifter
motor (M16/M17), and disconnect the
connector [2]; then, detach the lifter motor [3].
F-8-58
[3]
[4]
[4]
[5]
[1]
[2]
[2]
[3]
[4]
[1]
[1]
[1]
[3]
[2]
[1]
[2]
[2]
[3]
[3]