Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию, Страница: 356 / 615

Chapter 12
12-5
Log detailed screen
F-12-3
Detailed information of individual communication test error is displayed.
Refer to the displayed message to "Error message list".
It shifts to "Log list screen" by the [OK] button pressing.
Maximum length of error information: 128 characters (not include NULL)
12.1.9 Sleep operation
0011-6839
When there is a method that should be transmitted while e-RDS is operating (ON), e-RDS wakes from the
state of sleep and begins transmitting.
12.1.10 Network Setting (Maintenance)
0011-6840
You should do the network setting of Device appropriately before the e-RDS setting.
A. Display the Additional Functions screen.
- Press [Additional Functions (*)] key.
- Input ID code.
B. Display the TCP/IP Settings screen.
- Select (touch) [System Settings] > [Network Settings] > [TCP/IP Settings] on the Touch Panel
Display.
C. Setting of items related to IP address
- Select (touch) [IP Address Settings] => IP Address Settings screen is displayed.
- Set each items such as IP Address, Subnet Mask, Gateway Addresses, and DHCP, etc.
- Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.
D. DNS Settings
- Select (touch) [DNS Settings] => DNS Settings screen is displayed.
- Set necessary items.
- Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.
E. Proxy Settings
- Select (touch) [Proxy Settings] (Press Down arrow button until [Proxy Settings] is displayed on the
TCP/IP Settings screen.) => Proxy Settings screen is displayed.
- Set necessary items.
- Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.
F. Display the normal screen.
- Press [Additional Functions (*)] key pressing or press [Done] button to a necessary frequency.