Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 389 / 615

Chapter 14
14-12
F-14-16
5) Check to make sure that the horizontal
registration value (L; left margin) of the image
made on paper from cassette 3/4 is 2.5 +/-1.5
mm.
F-14-17
[1] Paper movement
6) When done, tighten the 2 fixing screws
loosened in step 3).
7) Shift up the cassette front cover [1] in the
direction of the arrow, and secure it in place
using 2 screws [2].
F-14-18
8) Put cassette 3/4 back inside the machine.
9) When done, execute the following service
mode items:
Cassette 3
COPIER > FUNCTION > CST > C3-STMTR
COPIER > FUNCTION > CST > C3-A4R
Register the paper width basic value for
cassette 3.
9-1) Place STMTR paper in the cassette 3, and
move the side guide plate to suit the STMTR
width.
9-2) Select C3-STMTR in service mode to
highlight, and press the OK key so that
adjustment will be executed and the value will
be registered automatically.
9-3) Likewise, repeat steps 9.1) and 9.2) for
A4R.
Cassette 4
COPIER > FUNCTION > CST > C4-STMTR
COPIER > FUNCTION > CST > C4-A4R
Perform the work you performed for cassette 3.
<Front Deck Left/Right>
1) Press the release button of the front deck (left/
right), and slide out the deck.
2) Loosen the 4 screws [1].
F-14-19
3) Move the cassette guide assembly (front) [1] to
the front or the rear to make adjustments.
- move the guide plate to the rear to decrease
the horizontal registration (left margin).
- move the guide plate to the front to increase
the horizontal registration (left margin).
[1]
[1]
[2]
[2]
image
L1
[1]
[1]
[2]
[1]
[1]