Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 305 / 615

Chapter 9
9-17
9.5.7 Sub Thermistor
9.5.7.1 Removing the Sub Thermistor
0010-9448
1) Slide out the fixing assembly.
2) Remove the fixing web and the oil pan.
3) Remove the fixing harness cover.
4) Disconnect the connector [1] and remove the
screw [2]; then, detach the sub thermistor
assembly [3].
F-9-40
5) Remove the screw [1], and detach the sub
thermistor [2].
F-9-41
9.5.8 Thermal Switch
9.5.8.1 Removing the Thermal Switch
Unit
0010-9450
1) Remove the fixing assembly.
2) Remove the fixing web; then, remove the 2
screws [1] and the oil pan [2], and detach the
fixing harness cover [3].
F-9-42
3) Remove the faston [1], and remove the 2
screws [2]; then, detach the electrode assembly
[3] and the thermal switch holder [4].
F-9-43
4) Remove the 4 screws [1], and detach the
thermal switch unit [2].
F-9-44
9.5.8.2 Mounting the Thermal Switch Unit
0010-9451
F-9-45
- When mounting the thermal switch [1], be sure
that it is in contact with the fixing roller [2] as
shown.
- The thermal switch must be replaced as the
thermal switch unit.
- Do not use again the thermal switch wolse
contact point become open.
[3]
[2]
[1]
[1] [2]
[1]
[1]
[3] [2]
[3] [2] [2] [4] [1]
[1]
[1] [2]
[2]
[1]