Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Страница: 521 / 615

Chapter 17
17-59
17.5.3 SORTER
17.5.3.1 SORTER Items
0011-6678
T-17-47
SL-ON ** Use it to start the operation of the solenoid.
1
<Procedure>
1) Select the item, and press the OK key to start the motor operation.
2) Press the OK key to stop the operation. (The operation will stop automatically in about 5
sec, but the indication will not change to 'STOP' until the OK key is pressed once again.)
MTR-ON
** Use it to start motor operation.
1
<Procedure>
1) Select the item, and press the OK key so that the motor will start.
2) Press the OK key to stop the operation. (The operation will stop automatically in about 5
sec, but the indication will not change to 'STOP' until the OK key is pressed once again.)
ROLL-
CLN ** Use it to clean the ADF roller.
1
<Procedure>
1) Select the item so that the roller starts to rotate.
2) While the roller is rotating, clean it by pressing lint-free paper (moistened with alcohol)
against it.
3) Select ROLL-CLN to highlight, and press the OK key so that the roller will stop.
FEED-
ON ** Use it to check the passage of paper on the ADF on its own.
1
<Procedure>
1) Select the item, and press the OK key so that paper movement starts according to the
operation mode selected using FEED-CHK.
SORTER > FUNCTION
Sub item Description Level
PCH-
STUP Use it to setup up a high-accuracy puncher. (non-Japanese model only)
1
Use it to adjust the horizontal registration position when installing a high-accuracy puncher.
Procedure
1) Select the item, and press the OK key.
2) See that the machine turns out a blank print.
FEEDER > FUNCTION
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description Level